Chimney Caps
 

Custom Gelco Chase Covers

These Chase Covers are made of either 24-ga. stainless steel, copper, galvanized steel painted black or .040 thick aluminum. Since they are custom made, you can order them with or without holes. If you are ordering with holes, you should also add the optional cover to keep out water. You can also order a drip edge on the bottom to divert water away from the chase. When ordering, here's what you need: dimensions of each side; diameter of each hole you want (if no hole or center hole, this is all we need), if multiple holes needed, we'll need an exact drawing to show us hole placement. Special order Gelco Chase Covers are non-returnable since each is constructed to your exact specifications. Please fill out all the data in the form below and try to be as precise as possible. Once we receive the form, we will contact you with an estimate and have it made if you wish. All fields MUST be filled out! Use the graphic layout pictures below to properly enter into online form!

Stainless Steel Only and Copper is Special Order!

General Information Section (all measured in inches to the nearest 1/8th of an inch):

Please give all exact measurements. We recommend adding .25" of an inch to all 4 sides only!
This will give room to maneuver for clearance. Please do not add this .25" to the forms below.
Please type Yes or No in this box if you'd like us to add it only.
If you are not sure, contact Tom Adams at 973-809-4345
 Type 'Yes' or 'No' to add the .25" clearance.


Material (Stainless Only, Copper - is Special Order!)
Perimeter Dimensions
Diagonal Dimensions
Drip Edge (Type YES or NO)
Skirt Height
Cross Break (Type YES or NO)

Single Hole Section (If needed):

Hole Diameter
Center hole in chase cover? (Type YES or NO)
Distance from sides (not needed if centered)
Collar (Type YES or NO)
If Yes, Collar Height

Two-Hole Section (If needed):

1st Hole:
Hole Diameter
Center hole in chase cover? (Type YES or NO)
Distance from sides (not needed if centered)
Collar (Type YES or NO)
If Yes, Collar Height

2nd Hole:
Hole Diameter
Center hole in chase cover? (Type YES or NO)
Distance from sides (not needed if centered)
Collar (Type YES or NO)
If Yes, Collar Height

* Required for proper estimate in shipping and contact purposes...

Contact Info:
Full Name *
Email Address *
Number and Street *
City *
2 letter State *
Zip Code *
Phone Number w/ Area Code

Comments:


 More Caps>>>